Step-down adjustable inverter DP30V5A-L 0-32V, 0-5.1A

Product detailed description

Voltage and current regulation! Make your lab source, it's easy!

Instructions:

• ON/OFF: press the ON/OFF button once to turn on/off in any state; press the button again to change the state. When you switch off, the display shows OFF
• Output voltage and current settings: Press SET briefly and the LED display will flash. You can press two buttons ("-/IN" and "+/OUT" on the left of the display) to increase or decrease the value. Press the SET button briefly again, this will change the adjustable value from 0.01V to 0.1V 1V to 0.01A to 0.1A to 1A. Press the button ("-/IN" and "+/OUT" from the left of the display) to increase or decrease the value. If you do not press the SET button, the setting will be automatically terminated after 6 seconds and the current set value will be automatically saved.
• Input and output Switching the display: If you are not in SET mode, you can press the two buttons ("-/IN" and "+/OUT" on the left of the display) to switch the display between the current input voltage and the current output voltage. If it shows input voltage, the LED marked "IN" is lit; if it shows output voltage, the LED marked "OUT" is lit.
• CC and CV indications: when the module is in constant voltage (CV) or constant current (CC) state, the CC or CV LED is lit.
• Output current, calibration: in no-load condition, hold down the SET button until the display flashes. If the display flashes, the calibration is complete. Then you can release the SET button.
• Setpoints are saved automatically: during operation, the setpoints are saved automatically. The next time you turn it on, you will have the last set voltage and current stored.

Specifications:

• input voltage: 6-40V
• output voltage: 0V-32V (0.01V continuously adjustable). Max will be one volt less than the input voltage
• output current: 0-5.1A (0.001A continuously adjustable)
• output power max: 160W
• output voltage accuracy: ±(0.5%+1 characters)
• output current accuracy: ± (1% + 3 characters)
• ripple Wave (full load 40v to 32V/5A): around 100 mV VPP
• efficiency: 96%
• dimensions: 85 x 58 x 31mm
• weight: 66g

Example of use

Included in delivery:

• 1pc STEP-DOWN adjustable power converter DP30V5A-L

Remark:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.
• When working with high current, it is necessary to ensure heat dissipation.