Vertical wind turbine 20V 20w

Product detailed description

A wind turbine with vertical blades that allow it to be independent of the direction of the surrounding wind. The power is produced by a three-phase motor located in the turbine with an external rectifier that converts the current to DC. The base has several holes in it for drilling and anchoring, for example in plaster or roof.

Build:

1. Take the two white plastic triangles (3) and the three metal L's (4) and, using the 3 longer screws (1) and nuts, screw them together so that the shorter arms of the metal L's point downwards.
2. Take the blades (6) and use the shorter blades (1) to screw them onto the cat arms of the metal L. Make sure that all blades are in the same direction and before tightening the screws check that the ends of the blades are in the same plane and some are not lower or higher.
3. Screw the shaft (5) into the base (2), then put the assembled rotor on top of the shaft and tighten it with two nuts.
4. Connect the diodes two in series, so that the negative pole is connected to the positive pole, with one wire from the motor between them. Then connect the positive and negative ends together to create a positive and negative output and feed a capacitor between them.

Specifications:

• Output voltage: 1-20V DC
• Output current: 0 - 1A
• Dimensions:
  • Height: 380mm
  • Base diameter: 85mm
  • Propeller diameter: 210mm
  • Propeller blade thickness: approx. 2mm
• Operating speed: 100 - 6 000 rpm
• Weight: approx. 600g

Delivery components:

• 1pc Vertical Wind Turbine 20V 20w

Remark:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.