LaskaKit MIDI Electro Starter Kit

Product detailed description

Parts list:

• 1pc Non-soldering contact field 400 pins
• 1pc 5V, 3.3V Power supply module for breadboard
• 65pcs Breadboard male-to-male wires
• 20pcs Dupont Connecting Cables M-F male-female (20cm)
• 1pc Active buzzer
• 1pc Passive buzzer
• 1pc Potentiometer
• 1pc IO 4N35
• 1pc IO 74HC595
• 5 pcs Diode 1N4007
• 5pcs NPN Transistor PN2222
• 2 pcs Photoresistor
• 1pc Thermistor 10k
• 10pcs Button
• 10 pcs White LED
• 10 pcs Yellow LED
• 10 pcs Blue LED
• 10 pcs Green LED
• 10 pcs Red LED
• 1pc RGB LED
• 2pcs Dupont 40Pin 2,54 mm pin strip
• 10pcs 22pf Ceramic capacitor
• 10pcs 104pf Ceramic capacitor
• 5pcs 10UF 50V Electrolytic Capacitor
• 5pcs 100UF 50V Electrolytic Capacitor
• 10pcs resistor (10R)​
• 10pcs resistor (100R)​
• 30pcs resistor (220R)​
• 10pcs resistor (330R)​
• 10pcs resistor (1k​)
• 10pcs resistor (2k)​
• 10pcs resistor (5k1)​
• 10pcs resistor (10k).
• 10pcs resistor (100k)​
• 10pcs resistor (1M).

Specifications:

• Non-soldering contact field 400 pins:
  Non-soldering contact field (400 pins, 80 x 54mm), anodized contacts, high durability acetyl ABS material.
  • Number of pins: 400
  • Power branch: 2 x (+,-)
  • Material: ABS plastic
  • Dimensions: 164x54x9mm
• 5V, 3.3V Power supply module for breadboard:
  The easiest way to connect to a non-soldering field voltage. You plug into the breadboard (MB102) and use a USB or adapter for power. The module can connect power to two voltage branches. For each, you can choose with the jumper whether to connect 5V or 3.3V. Very practical when developing voltage-multilevel circuits. Signalling LED and switch.
  • Input voltage: 6.5-12 V (DC) or USB power supply
  • Output voltage: 3.3 V/5V (2 independent outputs)
  • Maximum output current: 700 mA
  • Size: 55x35x22mm
  • Standard Pitch (2.54mm)
• Breadboard male-to-male conductors 65 pieces:
  Universal wires that are always good to have on hand. They can be easily plugged into the development boards Arduino of the platforms and non-soldering arrays that we offer. 44 pieces of wires 120mm long, 8 pieces 160mm long, 4 pieces 200mm long, 4 pieces 240mm long. A total of 65 pieces of wires.

Recommendations for use:

• The 5V output of the module has no short circuit protection, so we recommend using a charger to power the module via the USB connector, as most chargers have built-in protection.
• The USB connector can be used as a 5V source when powering the module via a 5.5mm connector (for example, you can power Arduino via a cable). The total current drawn from the module must not exceed 700mA.
• Important: We do not recommend powering the module from the computer's USB connector because if you short the module, you could destroy the computer port.

Included in delivery:

• 1pc LaskaKit Breadboard Prototyping Kit

Remark:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.