IoT ESP8266 Lua NodeMcu V2 WIFI Module
Code: DD100006
Free Shipping
From 100 EUR
30 Days to Return
For Registered
30 Days to Return
For Registered Customers
Free Shipping
For orders from 100 EUR
Customer Care
We handle complaints within 5 days
Quick dispatch
Within 24 hours
Related products
Product detailed description
The NodeMCU Dev Board is based on the esp8266 chip from Expressif. It combines the functions of a WIFI access point and station + microcontroller and uses a simple programming language.
The board is compatible with Arduino IDE and NodeMCU. English tutorials can be found in the resources section below.
All I/O pins have interrupts, PWM, I2C and 1-Wire , except pin D0.
The board has a USB Micro connector and a USB to serial (UART) converter, making it easy to connect this board to your computer using a USB Micro cable.
Specifications:
| Microcontroller | ESP-12E |
| USB - Serial Converter | CH340G |
| Digital I/O Pins | 11 |
| Analog Inputs | 1 |
| Flash | 4MB |
| Dimensions | |
| Length | 46mm |
| Width | 26mm |
| Height | 7mm |
| Weight | 8.26g |
Included in delivery:
- 1pc ESP8266 Lua NodeMcu V2
Remark:
- Lua is a 3.3V device. If you plug it into 5V digital sensors or devices, you may need a low-level converter like our 4-channel or 8-channel converter modules.
- This product is not a standalone functional unit and may require professional installation.
- Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.
Additional parameters
| Category: | Retired |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.013 kg |
| Type: | ESP |
| Logical levels: | 3.3V |
| I/O pins: | 11 |
| PWM pins: | 10 |
| ADC pins: | 1 |
| Frequency: | 26MHz |
| Flash memory: | 4MB |
| SRAM memory: | 64kB |
| EEPROM memory: | Ne |
| Connector with battery charger: | No |
| Microcontroller: | ESP8266EX |
| Converter: | CH340 |
| Bluetooth: | No |
| WiFi: | Yes |
-
Začínáme s Wemos D1 mini (podobná deska)
-
Návod na instalaci ovladače
-
Pinout (286.8 kB)
-
Porovnání ESP8266 modulů (1.9 MB)
-
Ovladače pro CH340
4,6
5 ratings
Add a rating
5
4
3
2
1
5
MH
Michal Horák
Michal Horák
Super .. koupil jsem spolecne s DOIT Motor Shield L293D pro NodeMCU Lua V2 a udelal jsem detem lanovku z merkuru ovladanou pres mobil. Za malo penez spousty legrace.
3
AK
Artem Kolychev
Artem Kolychev
Nedokazal jsem to zapojit k PC.
5
VP
Vladislav Pustowka
Vladislav Pustowka
OK
5
PR
Peter Rodziňák
Peter Rodziňák
Funguje to prefektne, da sa to programovat v prostredi Arduina, kde si treba naimportovat prislusne doplnky pre tuto dosku.
Vytvorenie weboveho servra s pripojenim cez WIFI s pomocou prikladu fungovalo na prvy pokus. Je to dobra platforma na vyvoj dialkovo ovladanych zariadeni, ci uz cez web alebo z mobilneho zariadenia.
5
TS
Tomáš Spurný
Tomáš Spurný
Naprosto spokojený
Be the first who will post an article to this item!