Remote Controlled Relay AK-RK04 12V 433MHz EV1527 10A 4-Channel

Product detailed description

The AK-RK04 remote control relay is a module that allows remote control of electrical circuits using a wireless signal. This type of relay is often used in various applications such as remote control of garage doors, gates, lighting, fans, appliances or other electrical devices.

Specifications:

• Model: AK-RK04
• Power supply: 10-14VDC
• Quiescent current: <5mA
• Receiver sensitivity: -104dbm
• RF mode: superheterodyne receiver
• Number of relays: 4x
• Range: Up to 100 metres in open space
• Compatibility: 433Mhz RF drivers (with EV1527 support, e.g. KT01-4, KB-027C, KT02-117S-4)
• Control modes:
  • Momentary mode: the relay is active only while the button on the remote control is pressed.
  • Toggle mode: pressing the button on the remote control switches the relay to the opposite state (on/off).
  • Latched mode: the relay remains in the active state until the next button press.
• Operating temperatures: -30°C to 80°C
• PCB dimensions: 68x48mm
• Dimensions: 75x55x30mm
• Weight: 76g

Programming:

• Resetting the receiver:
  • Press the programming button eight times,
  • The LED flashes eight times to indicate that all drivers have been forgotten,
  • No driver will be functional after this step.
• Programming the driver in the current mode:
  • Press the programming button once,
  • The receiver switches to the momentary mode setting and the LED is fully lit (the receiver is in learning mode),
  • Briefly press the button on the remote control,
  • The LED lights up and then goes off,
  • Wait 2 seconds, the LED will flash and then turn on dimly to indicate programming is complete.
• Programming the driver in switching mode:
  • Press the programming button twice,
  • The receiver switches to the switching mode setting and the LED is fully lit (receiver is in learning mode),
  • Briefly press the button on the remote control,
  • The LED lights up and then goes off,
  • Wait 2 seconds, the LED will flash and then turn on dimly to indicate programming is complete.
• Programming the driver in lock mode:
  • This mode requires the use of two buttons on the controller. The first button switches the relay on, the second button switches it off (for example: button A = ON - button B = OFF),
  • Press the programming button three times,
  • The LED is fully lit (the receiver is in learning mode),
  • Press the A button briefly and then press the B button briefly,
  • Wait 2 seconds, the LED will flash and then turn on dimly to indicate programming is complete.
• Special Modes:
  • 2 channels momentary mode + 2 channels switching mode: press the programming button four times.
  • 2 channels momentary mode + 2 channels lock mode: press the programming button five times.
  • 2 channels switching mode + 2 channels locking mode: press the programming button six times.
  • 4 channel lock mode: press the programming button seven times.

Included in delivery:

• 1pc Remote controlled relay AK-RK04 12V 433MHz EV1527 10A 4-channels

Remark:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.
• This remote control transmitter only supports the EV1527 receiver learning code
• This remote control cannot be programmed