Remote control relay AK-RK01 12V 433MHz EV1527 10A 1-channel

Product detailed description

The AK-RK01 remote control relay is a module that allows remote control of electrical circuits using a wireless signal. This type of relay is often used in various applications such as remote control of garage doors, gates, lighting, fans, appliances or other electrical devices.

Specifications:

• Model: AK-RK01
• Power supply: 10-14VDC
• Quiescent current: <5mA
• Receiver sensitivity: >-97dbm
• RF mode: superheterodyne receiver
• Number of relays: 1x
• Range: Up to 100 metres in open space
• Compatibility: 433Mhz RF drivers (with EV1527 support, e.g. KT01-4, KB-027C, KT02-117S-4)
• Control modes:
  • Momentary mode: the relay is active only while the button on the remote control is pressed.
  • Toggle mode: pressing the button on the remote control switches the relay to the opposite state (on/off).
  • Latched mode: the relay remains in the active state until the next button press.
  • Delay mode: pressing the button on the controller switches on the relay. When the button is released, a timer starts (5, 10 or 15s), after which the relay is disconnected.
• Operating temperatures: -30°C to 80°C
• PCB dimensions: 35x30x20mm
• Dimensions: 48x40x25mm
• Weight: 30g

Programming:

• Resetting the receiver:
  • Press the programming button eight times,
  •  
  • No driver will be functional after this step.
• Programming the driver in the current mode:
  • Press the programming button once,
  • The receiver switches to the momentary mode setting and the LED goes off (the receiver is in learning mode),
  • Briefly press the button on the remote control,
  • The LED lights up and then goes off,
  • Wait 3 seconds, the LED will light up (programming complete).
• Programming the driver in switching mode:
  • Press the programming button twice,
  • The receiver switches to the switching mode setting and the LED goes off (the receiver is in learning mode),
  • Briefly press the button on the remote control,
  • The LED lights up and then goes off,
  • Wait 3 seconds, the LED will light to indicate programming is complete.
• Programming the driver in lock mode:
  • This mode requires the use of two buttons on the controller. The first button switches the relay on, the second button switches it off (for example: button A = ON - button B = OFF),
  • Press the programming button three times,
  • The LED goes off (the receiver is in learning mode),
  • Press the A button briefly, the LED will flash five times,
  • Press the B button briefly and the LED will flash five times,
  • Wait 3 seconds, the LED will light to indicate programming is complete.
• Delayed mode:
  • - Press the programming button four times for a delay of 5 seconds,
  • Press the programming button five times for a 10 second delay,
  • Press the programming button six times for a delay of 15 seconds,
  • The receiver goes into delayed mode and the LED goes off (learning mode),
  • Briefly press the button on the remote control,
  • The LED lights up and then goes off,
  • Wait 3 seconds, the LED will light up (programming complete).

Included in delivery:

• 1pc Remote controlled relay AK-RK01 12V 433MHz EV1527 10A 1-channel

Remark:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.
• This remote control transmitter only supports the EV1527 receiver learning code
• This remote control cannot be programmed